IP Setup
The IP Settings/Options window lets you view and, if connected via the RS-232 or RS-422
link or logged on via the Ethernet port as an administrator, edit settings unique to the
Ethernet interface. To display the IP Settings/Options window, select
pull-down menu.
Tools
Figure 78.
CAUTION: Editing the following fields on the IP Settings/Options screen while
NOTES:
See
"IP
Addressing" on page 127 for basic information about IP addresses.
IP Settings/Options Window
connected via the Ethernet port can immediately disconnect your
computer from the switcher:
•
IP Address
•
Gateway IP Address
•
Subnet Mask
•
Use DHCP
•
Administrator Password
•
Extron recommends editing the settings on this screen using the RS-232 or
RS-422 link and protecting the Ethernet access to this screen by assigning an
administrator password to qualified and knowledgeable personnel only.
•
When the control program is connected to the DXP via RS-232 or RS-422,
the
Administrator Password
If a password has been inadvertently changed to an unknown value, you can
look up and, if desired, change a password in this window without knowing
the current password.
DXP DVI Pro and DXP HDMI Series • Matrix Software
IP Options
and
fields are not masked.
User Password
from the
77