Updating The Firmware - Extron electronics DXP DVI Pro User Manual

6.
Use the radio buttons associated with each addressee to select whether the addressee
will be e-mailed about failures, fixes, both, or will not be notified. The
button is useful for temporarily removing personnel from the e-mail list when they are
unavailable, such as when traveling or on vacation.
7. If desired, click the
8.
Click the

Updating the Firmware

The firmware upgrade utility provides a way to replace the firmware that is coded on the
DXP control board without needing to take the switcher out of service, open its enclosure,
and replace the firmware chip.
Update the DXP firmware as follows:
NOTE:
1.
Go to the Extron web site, www.extron.com, and download the latest firmware file
to your computer.
a. On the Extron web page, select the
b.
On the Download Center page, click the
c.
Click on the name of your DXP switcher.
d. On the next screen, fill in the required information, then click the
product name_firmware version.exe
e. On the File Download - Security Warning window, click
f.
On the Save As window, browse to the folder where you want to save the
firmware file, and click
drive.
2.
Start the Matrix Switcher Control Program and connect to the DXP switcher (see steps
1 through 4 under
NOTE:
Send test E-mail
button for the e-mail address changes to take effect.
Take
The update firmware utility is for replacing the firmware that controls all
switcher operation. This is not the page to insert your own HTML pages. See
"Uploading HTML Files" on page 85 to insert custom HTML pages.
Save . The firmware installation file is placed on your hard
"Using the Software" on page 71 for the procedure).
The Ethernet connection is much faster than an RS-232 or RS-422
connection. Extron recommends using the Ethernet connection rather
than the serial port for firmware uploads.
DXP DVI Pro and DXP HDMI Series • Matrix Software
button to test the e-mail function.
tab.
Downloads
link on the left sidebar menu.
Firmware
button.
.
Save
radio
None
Download
83