Example 2: Adding A Tie To A Set Of Video Ties - Extron electronics DXP DVI Pro User Manual

Example 2: Adding a Tie to a Set of Video Ties

In the following example, a new tie is added to the current configuration. The illustrations
show the front panel indications that result from your actions.
NOTE:
1. Press and release the Esc
Press the Esc button to clear all selections.
C O N T R O L
ENTER PRESET
Figure 18.
2.
To select only video for the tie, press and release the Video and Audio buttons as
necessary until the Video button is lit and the Audio button is off.
Press the Video button to toggle video on.
The button lights green when selected.
Figure 19.
3.
Press and release the Input 5 button.
Press and release the Input 5 button.
The button lights green to indicate that video
outputs can be tied to or untied from this input.
1
Figure 20.
4.
Press and release the Output 1 button.
Press and release the Output 1 button.
The button blinks green to indicate that the
selected video input will be tied to this output.
1
Figure 21.
This example assumes that you have performed example 1.
>
button.
VIEW ESC
The button flashes once.
Clear All Selections
I / O
VIDEO
Select Video Only
INPUTS
2 3 4 5 6 7
Select an Input with Ties
2 3 4 5 6 7
OUTPUT
Select an Additional Output
DXP DVI Pro and DXP HDMI Series • Operation
AUDIO
Press the Audio button to toggle audio off.
The button is unlit or background illuminated when deselected.
The Output 3, Output 4, and Output 8 buttons
light green to indicate the video ties created in
example 1.
1 2
3
8
CONTROL
8
VIEW
ENTER PRESET
The Enter button blinks
green to indicate the need to
confirm the change.
5 6 7
4 8
OUTPUT
ESC
21