Configure Switch Stack - D-Link DES-3624 Series User Manual

The top of the screen displays the current settings for Console Timeout and Serial Port as well as the
Baud Rate, Character Size, and Stop Bit for Out of Band and Console settings, respectively.

Configure Switch Stack

The Switch Stack Configuration screen shows various pieces of information about your Switch, and allows
you to set the System Name, System Location, and System Contact. These settings can be retrieved from
the Switch using SNMP requests, allowing these settings to be used for network management purposes.
Choose Configure Switch Stack to access the second item on the System Configuration menu. The
following screen appears:
The fields you can set are:
System Name Corresponds to the SNMP MIB II variable
name to the Switch for administrative purposes. The Switch's fully qualified domain name is often used,
provided a name has been assigned.
System Location Corresponds to the SNMP MIB II variable
indicate the physical location of the Switch for administrative purposes.
System Contact Corresponds to the SNMP MIB II variable
name and contact information for the person responsible for administering the Switch.
52
Figure 6-11. Switch Stack Configuration screen
Stackable NWay Ethernet Switch User's Guide
, and is used to give a
system.sysName
system.sysLocation
, and is used to give the
sysContact
, and is used to
Using the Console Interface