Table of Contents
Advertisement
TIP: From any screen, press
the brightness levels. This can be helpful when the
brightness is so low you cannot see the screen.
Adjusting the Color Mode
1
Select Settings > System > Sounds and Display > Color
Mode.
TIP: Select
> Color Mode from any screen to access the
color settings.
2
Select an option.
Turning On the Chartplotter Automatically
You can set the chartplotter to turn on automatically when the
power is applied. Otherwise, you must turn on the chartplotter by
pressing .
Select Settings > System > Auto Power Up.
NOTE: When Auto Power Up is On, and the chartplotter is
turned off using , and power is removed and reapplied
within less than two minutes, you may need to press
restart the chartplotter.
Enabling Screen Lock
For anti-theft protection and to prevent unauthorized use of your
device, you can enable the Screen Lock feature which requires
a PIN (Personal Identification Number). When enabled, you
must enter the PIN to unlock the screen each time you turn on
the device. You can set up recovery questions and answers as
prompts in case you forget the PIN.
If you enable the Screen Lock feature, Garmin Support cannot
retrieve the PIN or access your device. It is your responsibility to
provide the PIN to anyone authorized to use the vessel.
1
Select Settings > System > Sounds and Display > Screen
Lock > Setup.
2
Enter a memorable numeric PIN of 6 digits.
3
Reenter the PIN to verify.
4
When prompted, choose and answer three PIN recovery
questions.
You can Disable or Reset the PIN and recovery questions as
needed.
Automatically Turning Off the System
You can set the chartplotter and the whole system to turn off
automatically after it has been asleep for the selected length of
time. Otherwise, you must press and hold
system manually.
1
Select Settings > System > Auto Power Off.
2
Select an option.
ActiveCaptain App
This feature allows users to submit information. Garmin makes
no representations about the accuracy, completeness, or
timeliness of information submitted by users. Any use or reliance
on the information submitted by users is at your own risk.
The ActiveCaptain app provides a connection to your GPSMAP
device, charts, maps, and the community for a connected
boating experience.
On your mobile device with the ActiveCaptain app, you can
download, purchase, and update maps and charts. You can use
the app to easily and quickly transfer user data, such as
waypoints and routes, connect to the Garmin Quickdraw
6
repeatedly to scroll through
NOTICE
to turn off the
CAUTION
Contours Community, update device software, and plan your
trip.
You can connect to the ActiveCaptain community for up-to-date
feedback on marinas and other points of interest. The app can
push smart notifications, such as calls and texts, to your
chartplotter display when paired.
ActiveCaptain Roles
Your level of interaction with the GPSMAP device using the
ActiveCaptain app depends on your role.
Feature
Register device, built-in maps, and supplemental map
cards to account
Update software
Automatically transfer Garmin Quickdraw contours you
have downloaded or created
Push smart notifications
Automatically transfer user data, such as waypoints
and routes
to
Begin navigating to a specific waypoint or navigating a
specific route, and send that waypoint or route to the
GPSMAP device
Getting Started with the ActiveCaptain App
You can connect a mobile device to the GPSMAP device using
the ActiveCaptain app. The app provides a quick and easy way
for you to interact with your GPSMAP device and complete such
tasks as sharing data, registering, updating the device software,
and receiving mobile device notifications.
1
From the GPSMAP device, select OneHelm™, A/V, Gauges
> ActiveCaptain.
2
From the ActiveCaptain page, select Wi-Fi Network > Wi-Fi
> On.
3
Enter a name and password for this network.
4
Insert a memory card in the GPSMAP device's card slot
(Memory Cards, page
5
Select Set ActiveCaptain Card.
You might be prompted to format the memory card.
Formatting the card deletes all information saved on the card.
This includes any saved user data, such as waypoints.
Formatting the card is recommended, but not required.
Before formatting the card, you should save the data from the
memory card onto the device internal memory
Data from a Memory Card, page
card for the ActiveCaptain app, you can transfer the user
data back to the card
page
65).
Be sure the card is inserted each time you want to use the
ActiveCaptain feature.
6
From the application store on your mobile device, install and
open the ActiveCaptain app.
7
Bring the mobile device within 32 m (105 ft.) of the GPSMAP
device.
8
From your mobile device settings, open the Wi‑Fi
connections page and connect to the Garmin device, using
the name and password you entered in the Garmin device.
Enabling Smart Notifications
Do not read or reply to notifications while operating the vessel.
Failure to pay attention to the conditions on the water can result
in vessel damage, personal injury, or death.
Owner Guest
Yes
Yes
Yes
Yes
Yes
Yes
3).
NOTICE
(Copying User
65). After formatting the
(Copying User Data to a Memory Card,
WARNING
ActiveCaptain App
No
Yes
No
Yes
No
Yes
®
Advertisement
Table of Contents
