Configuring The Data Encryption Settings; Configuring The Usb Setup Menu - Xerox WorkCentre 6605 User Manual

Configuring the Data Encryption Settings

At the printer control panel, press the Machine Status button.
1.
Touch Tools>Admin Settings.
2.
3. Use the Up or Down arrows to navigate, then touch Secure Settings.
Touch HDD Data Encryption, then touch On.
4.
5. When prompted, enter a passphrase, then touch OK.
To delete stored documents on the drive and restart the printer, at the prompt, touch Yes, Delete.
6.
To change the encryption key for HDD encryption, touch Encryption Key, enter the passphrase,
7.
then at the prompt, touch Yes, Delete.
To erase the hard drive by overwriting it with random data, touch HDD Overwrite, then select the
8.
number of times to overwrite the data.
Touch the Back arrow to return to the previous menu, or press the Services Home button to return
9.
to Service Home.

Configuring the USB Setup Menu

1. At the printer control panel, press the Machine Status button.
Touch Tools>Admin Settings.
2.
3. Touch USB Setup.
To have the USB port status appear on the display, touch Port Status>Enable>OK.
4.
5. At the Restart System prompt, touch Close.
6. To select the Adobe protocol, touch Adobe Protocol, select an option from the list, then touch OK.
At the Restart System prompt, touch Close.
7.
8. To restart the system, turn off the power switch, then turn it on again.
® ®
Xerox WorkCentre 6605 Color Multifunction Printer
Installation and Setup
97
User Guide