Xerox WorkCentre 6605 User Manual page 40

Installation and Setup
Installing the Wireless Network Adapter
The optional wireless network adapter plugs in to the back of the control board. After the adapter is
installed, and wireless networking is enabled and configured, the adapter is able to connect to a wireless
network.
To install the Wireless Network Adapter:
1. Turn off the printer.
2. Remove the packaging from the Wireless Network Adapter.
3. Follow the installation sheet and install the Wireless Network Adapter on the printer.
Note: When the Wireless Network Adapter is installed, remove it only as needed and after reading
the instructions for removing the Wireless Network Adapter.
4. To enable the Wireless Network Adapter, disconnect the Ethernet cable from the printer.
®
40 Xerox WorkCentre
User Guide
®
6605 Color Multifunction Printer