Xerox WorkCentre 6605 User Manual page 48

Hide thumbs Also See for WorkCentre 6605:
Table of Contents

Advertisement

Installation and Setup
15. If any of the settings are incorrect, click the Back button to return to the previous screen.
16. To print a record of the IP settings, click Print Printer Settings.
17. Click Finish.
When the printer restarts, it uses the information from Printer Setup Utility to connect with the
wireless router.
18. If the Ethernet cable is connected to the printer, disconnect it.
19. Wait approximately two minutes, then print a Configuration Report to check the connection.
20. If the printer does not successfully connect with the wireless network, check your network
information and try again.
Setting Up the Printer for Wireless LAN WPA-Enterprise
WPA-Enterprise Encryption is supported only when Infrastructure is selected as the Network Type in the
Wi-Fi settings section.
Note:
To manage digital certificates, enable the HDD Data Encryption and HTTPS communication.
1.
Import the certificate to use with the wireless LAN. For details, see
page 101.
Note:
Use Internet Explorer to import the certificate from Windows. Use Safari to import certificates
from Macintosh.
2.
Configure the digital certificate Purpose for wireless LAN (server or root certificate). For details, see
Configuring the Digital Certificate Purpose
3.
Verify the Certificate Authorities within the Category. For details, see
Certificate Purpose
4.
Configure WPA-Enterprise for PEAPVO-MS-CHAPV2, EAP-TLS, EAP-TTLS PAP, or EAP-TTLS CHAP.
a.
At your computer, open a Web browser, in the address field, type the IP address of the printer,
then press Enter or Return.
Click Properties.
b.
c.
In the left navigation panel, scroll down to Physical Connection, then select Wi-Fi.
d.
Configure the SSID.
At Network Type, select Infrastructure.
e.
f.
In the Security Settings section, select one of the following:
WPA-Enterprise-AES/WPA2-Enterprise-AES
WPA-Enterprise-TKIP
g.
In the WPA-Enterprise section, configure the EAP Identity, Login Name, and Password.
h.
From the Authentication Method list, select one of the following:
PEAPVO-MS-CHAPV2
EAP-TLS
EAP-TTLS PAP
EAP-TTLS CHAP
Click Save Changes.
i.
®
48
Xerox
WorkCentre
User Guide
on page 102.
®
6605 Color Multifunction Printer
on page 101.
Importing a Digital Certificate
Verifying the Digital
on

Advertisement

Table of Contents
loading

Table of Contents