Performing A Manual Color Registration Adjustment - Xerox WorkCentre 6605 User Manual

Maintenance
Performing an Automatic Color Registration Adjustment
Automatic color registration adjustment occurs every time a new toner cartridge is installed. You can run
this adjustment at other times as needed.
To perform an automatic color registration adjustment:
At the printer control panel, press the Machine Status button.
1.
2. Touch Tools, then touch Admin Settings.
3. Touch Service Tools.
Touch Color Registration>Auto Registration>Start.
4.
The printer runs while it performs the Auto Registration routine.

Performing a Manual Color Registration Adjustment

Color Registration adjusts the printer to make corrections to blurry or hazy prints, or prints with color
halos.
To perform a color registration adjustment:
1. At the printer control panel, press the Machine Status button.
Touch Tools, then touch Admin Settings.
2.
3. Touch Service Tools.
Touch Color Registration>Print Registration Chart>Print.
4.
5. Starting with the left side calibration lines, circle the line in each group where the color bar aligns
with the adjacent black bars.
®
220 Xerox WorkCentre
User Guide
®
6605 Color Multifunction Printer