Assigning The Printer Ip Address; Assigning The Ip Address Automatically - Xerox WorkCentre 6605 User Manual

Assigning the Printer IP Address

This section includes:
•

Assigning the IP Address Automatically .................................................................................................................... 51

• Finding the IP Address of the Printer .......................................................................................................................... 52
• Changing the IP Address Using CentreWare Internet Services ....................................................................... 52
• Assigning the IP Address Manually .............................................................................................................................. 53
By default, the printer is set to acquire an IP address from the network server using DHCP. Network
addresses assigned by DHCP are temporary, however. After a specified time, the network could assign a
new IP address to the printer. If the print driver is set to an IP address that changes periodically, you can
experience connectivity issues. To avoid problems, or if your network administrator requires a static IP
address for the printer, you can assign the IP address to the printer.
Note: You can view the IP address of your printer on the control panel or on the Configuration
Report. For details, see
See also:
Assigning the IP Address Manually
Finding the IP Address of Your Printer
Assigning the IP Address Automatically
At the printer control panel, press the Machine Status button.
1.
2. Touch the Tools tab.
Touch Admin Setting>Network.
3.
Touch Ethernet>TCP/IP>Get IP Address.
4.
5. To configure the printer to get an IP address from the server automatically or set its own IP address,
select an option:
− DHCP allows your DHCP server to assign an IP address to the printer. This option enables
Dynamic DNS Registration.
− Auto IP allows the printer to assign an IP address to itself, in the absence of a DHCP-capable
router or access point.
− BOOTP allows the printer to obtain an IP address from a BOOTP server that does not respond
to DHCP requests.
− RARP allows the printer to obtain an IPv4 address from an administrative host server.
Note: For best results in most networks, select DHCP/AutoIP.
Touch OK.
6.
7. At the Restart System prompt, touch Close.
Printing the Configuration Report
on page 51
on page 30
Xerox
on page 29.
® ®
WorkCentre 6605 Color Multifunction Printer
Installation and Setup
51
User Guide