Permission In Service Zone - LevelOne AMG-2001 User Manual

4.2.2 Permission in Service Zone

Configure Permission in Service Zone, go to: Users >> Group.
A Group can be allowed to access one Service Zone or multiple Service Zones. Moreover, a Group can
be applied different Policies within different Service Zones. Remote VPN is considered as a zone, where
clients log into the system via remote VPN.
Zone Name: The name of Service Zones and Remote VPN.
Enabled: Select Enabled to allow clients of this Group to log into the selected Service Zones.
For example, the above figure shows that users in Group 1 can access network services via
every Service Zone as well as Remote VPN under constraints of Policy 1.
Policy: Select a Policy that the Group will be applied with when accessing respective Service
Zones.
To Group Permission Configuration: The relation between Group and Service Zone is
many to many; every Group can access network services via more than one Service Zone,
and meanwhile, each Service Zone can serve more than one Group.
Click the hyperlink in the To Group Permission Configuration column to enter the Group
Configuration interface, which is based on the role of Service Zone, to configure the relation
between Group and Service Zone.
AMG-2001 Access and AP Management Gateway
62
User's Manual