Table of Contents
Advertisement
If the amount of traffic is larger than 4 GB, then the attribute of "XXXX-4GB" is for the carry. For
example, if the amount is 5 GB, you must set "None-Byte-Amount = 1048576" and
"None-Byte-Amount-4GB = 1".
On the other hand, if administrator fills in all attributes, it means that if any condition is reached,
the user will be kicked out from system. For example, if administrator set "None-Byte-Amount =
1048576"; "None- MaxByteIn = 1048576" and "None- MaxByteOut = 1048576". It means that
whatever the downlink or uplink or total traffic exceeded the limit, the user will be kicked out from
system.
2. VSA configuration in RADIUS server (IAS Server)
This section will guide you through a VSA configuration in your external RADIUS server. Before
getting start, please access your external RADIUS server's desktop directly or remotely from
other PC.
2.1. Step 1
Assume there are already have users in RADIUS Server
Assume there are already have Groups and assigned users to belong these Groups in
RADIUS Server
Assume there are already have Policies and assigned Groups to belong these Policies in
RADIUS Server
2.2. Step 2
Run "Internet Authentication Server"
Open "Remote Access Policies"
Select a Policy
Right click and scroll down to its properties page
AMG-2001
Access and AP Management Gateway
211
User's Manual
Advertisement
Table of Contents
