Now, let us begin to configure the Port Mapping. There are three main group of setting: Create
Batch, Change All Room State and Create One.
You can create the Room Mapping by a batch processing that if you want to create a contiguously
VLAN Tag and Room number.
Port Location Mapping Setup – Create Batch
Default Room State: The default state of the rooms, it may be: Charge, Free or Block.
Service Zone: The service zone of these rooms
VLAN ID Start: The first VLAN ID.
Number of VLAN: The total number of VLAN.
Start Room Number: The start room number.
Room Prefix: The prefix of room number.
Room Postfix: The postfix of room number.
AMG-2001
Access and AP Management Gateway
220
User's Manual