8.2 Virtual Server
Configure Virtual Server, go to: Network >> NAT >> Public Accessible Server.
This function allows the administrator to set virtual servers, so that client devices outside the
managed network can access these servers within the managed network. Different virtual servers
can be configured for different sets of physical services, such as TCP and UDP services in general.
Enter the "External Service Port", "Local Server IP Address" and "Local Server Port".
Select "TCP" or "UDP" for the service's type. In the Enable column, check the desired server to
enable. These settings will become effective immediately after clicking the Apply button.
AMG-2001
Access and AP Management Gateway
121
User's Manual