Table of Contents
Advertisement
3) Click on the General tab and choose
"Internet Protocol (TCP/IP)", and then
click Properties. Now, you can choose to
use DHCP or a specific IP address.
4) Using DHCP: If you want to use DHCP,
choose
"Obtain
automatically" and click OK. This is also
the default setting of Windows. Then,
reboot the PC to make sure an IP address is
obtained from AMG-2001.
5) Using Specific IP Address: If you want to
use a specific IP address, acquire the
following information from the network
administrator: the IP Address, Subnet Mask
and DNS Server address provided by your
ISP and the Gateway address of AMG-2001.
Caution:
If your PC has been set up completely, please inform the network administrator before proceeding to
the following steps.
AMG-2001
an
IP
address
206
Access and AP Management Gateway
User's Manual
Advertisement
Table of Contents
