Table of Contents
Advertisement
SIP: SIP authentication supports 4 Trusted SIP Registrar.
IP Address: The IP address of the Trusted SIP Registrar.
Remark: The administrator can enter extra information in this field for remark.
Group: A Group option can be applied to the clients who login with SIP Authentication. Be noted
that the specific route of the applied Policy for the selected Group cannot conflict with the
assigned WAN interface for SIP authentication.
SIP Interface Configuration
Configure SIP WAN Interface, go to: System Configuration >> Service Zones.
The system provides SIP proxy functionality, which allows SIP clients to pass through NAT. When
enabled, all SIP traffic can pass through NAT via a fixed WAN interface. The policy route setting of SIP
Authentication must be configured carefully because it must cooperate with the fixed WAN interface for
SIP authentication.
SIP Transparent Proxy can be activated in both NAT and Router mode. SIP Authentication must support
in either mode. For users logging in through SIP authentication, a group can be chosen to govern SIP
traffic. The policy's login schedule profile will be ignored for SIP authentication. Specific route and
firewall rules of the chosen group will be applied to SIP traffic.
AMG-2001
Access and AP Management Gateway
194
User's Manual
Advertisement
Table of Contents
