Cannot Detect The Machine During Wireless Lan Setup: Check 2 - Canon MX490 series Online Manual

Cannot Detect the Machine during Wireless LAN Setup: Check 2

Is the wireless LAN setting of the machine enabled?
Make sure that the or icon is displayed on the LCD.
If the icon is not displayed:
The wireless LAN setting of the machine is disabled. Enable the wireless LAN setting of the machine.
After enabling the wireless LAN setting, click Back to Top on the Check Printer Settings screen to try to
set up the network communication from the beginning.
If the icon is displayed:
Go to check 3.
Cannot Detect the Machine during Wireless LAN Setup: Check 3
577