Lan Settings - Canon MX490 series Online Manual

LAN settings

• Change LAN
Enables/disables either wireless LAN or access point mode.
• Wireless LAN setup
If your wireless router is compatible with WPS, set up wireless LAN following the on-screen instructions.
If not, select one of the setup methods below.
◦ Standard setup
Select when you perform settings for wireless LAN manually using the operation panel of the
machine.
◦ WPS (Push button)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi
Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.
◦ Other setup
Manual setup
Select when you perform settings for wireless LAN manually. You can specify multiple WEP
keys.
WPS (PIN code)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
Cableless setup
Select if you specify the settings of the access point information to the machine directly from a
device (such as a smartphone) without operating the wireless router. Follow the on-screen
instructions of the connecting device for the setup procedure.
• AP mode settings
When you use the machine as an access point (wireless router), specify the access point name (SSID)
and the security setting.
Using the Machine with the Access Point Mode
• Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out, refer to
Setting Information.
Important
• This printout contains valuable information about your computer. Handle it with care.
• Other settings
Important
• You cannot select the items below when LAN inactive is selected for Change LAN.
◦ Set printer name
Specifies the printer name. You can use up to 15 characters for the name.
211
Printing Out Network