Making Copies - Canon MX490 series Online Manual

Making Copies

This section describes the basic procedure to perform standard copying.
1. Make sure that the machine is turned on.
2. Load paper.
3. Press the COPY button.
The Copy standby screen is displayed.
4. Load the original document on the platen glass or in the ADF.
5. Confirm the page size and magnification.
1. Magnification
2. Page size
Note
• To change or confirm the page size, magnification, or other settings, press the Menu button, then
use the
Setting Items for Copying
• Press the COPY button to reset the magnification to 100%.
6. Use the (-)
7. Press the Color button for color copying, or the Black button for black & white copying.
The machine starts copying.
Remove the original on the platen glass or from the document output slot after copying is complete.
Important
• If you load the original on the platen glass, do not open the document cover or remove the original
while Scanning... is displayed on the screen.
• If you load the original in the ADF, do not move the original until copying is complete.
Note
• To cancel copying, press the Stop button.
• If you load the original on the platen glass, you can add the copying job while printing.
button to display the desired setting item.
(+) button or the Numeric buttons to specify the number of copies.
357