Canon MX490 series Online Manual page 474

Note
• If you select Search again and press the OK button, the machine starts searching for the
connected computers again.
• When you forward the scanned data to the computer using WSD (one of the network protocols
supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista), select Active for WSD
scan from dev. on WSD setting on Other settings in LAN settings under Device settings.
5. Make sure that Document type is selected, then press the OK button.
6. Use the button to select the document type, then press the OK button.
Note
• When you forward the scanned data to the computer searched using WSD, you cannot select the
document type.
• The * (asterisk) on the LCD indicates the current setting.
Auto scan
The machine detects the type of the originals automatically and the image is forwarded in the
optimized size, resolution and data format.
Important
• Load originals properly according to their type; otherwise, some originals may not be scanned
properly.
For details on how to load the original:
Loading Originals
• The following items can be scanned:
Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDs
• The following items cannot be scanned properly.
• A4 sized photos
• Documents smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a paperback with its
backbone cut off
• Originals on thin white paper
• Long and narrow originals such as panoramic photographs
• When you scan originals from the ADF, it may take longer to scan the first page.
Document
Scans the original on the platen glass or in the ADF applying the optimized settings for scanning a
document.
Photo
Scans the original on the platen glass as a photo data applying the optimized settings for scanning a
photo.
7. Specify the scan settings.
Specify each scan setting in order.
474