Canon MX490 series Online Manual page 513

• By entering the fax/telephone numbers:
Use the Numeric buttons to enter the recipient's fax/telephone number, then press the OK button.
Sending Faxes by Entering Fax/Telephone Number
Note
• If FAX no. re-entry in Security control under Fax settings is set to ON, use the Numeric
buttons again to enter the number, then press the OK button.
Security control
• By redialing:
Press the Menu button, use the
the button to select the number you want to dial, then press the OK button.
Manual Redialing
6. Add the recipient.
If you have already specified the recipient by entering the fax/telephone numbers or if you have already
specified the recipient from the outgoing call logs, specify a recipient from the registered recipients.
Broadcasting is displayed after specifying the multiple recipients.
If you want to add the recipient further, repeat the same procedure.
Note
• When Broadcasting is displayed, you can review the numbers you have entered by pressing the
button.
• Pressing the Back button allows you to delete the recipient's number you entered last.
7. Press the Color button for color transmission, or the Black button for black & white
transmission.
Important
• Color transmission is available only when the recipient's fax machine supports color faxing.
Note
• To cancel a fax transmission, press the Stop button. To cancel a fax transmission while it is in
progress, press the Stop button, then follow the instructions on the LCD.
• If documents remain in the ADF after the Stop button is pressed while scanning is in progress, Close
the feeder cover [OK]Eject the document is displayed on the LCD. By pressing the OK button, the
remaining documents are automatically ejected.
• When you press the Stop button, fax transmission to all the recipients specified will be canceled. You
cannot cancel a fax transmission to only one recipient.
button to select Redial, then press the OK button. Next, use
513