Canon MX490 series Online Manual page 491

Setting the Telephone Line Type Manually in China
This section describes the procedure to set the telephone line type manually in China.
1. Make sure that the machine is turned on.
2. Press the Setup button.
The Setup menu screen is displayed.
3. Use the button to select Fax settings, then press the OK button.
4. Use the button to select FAX user settings, then press the OK button.
5. Use the button to select TEL line auto select, then press the OK button.
The current telephone line type is displayed.
Note
• If you do not need to change the telephone line type, press the FAX button to return to the Fax
standby screen.
6. Use the button to select OFF, then press the OK button.
7. Use the button to select a telephone line type, then press the OK button.
Rotary pulse
Select when your telephone line type is pulse dialing.
Touch tone
Select when your telephone line type is tone dialing.
Note
• The * (asterisk) on the LCD indicates the current setting.
8. Press the FAX button to return to the Fax standby screen.
491