Cannot Detect The Machine When Setting Up Network Communication - Canon MX490 series Online Manual

Cannot Detect the Machine when Setting Up Network
Communication
If the machine could not be detected on the network when setting up the network communication, confirm
the network settings before redetecting the machine.
Cannot Detect the Machine during Wireless LAN Setup: Check 1
Important
• If the machine cannot be detected while you are setting up the network communication using a USB
cable, the machine may be in the access point mode. In this case, finish the access point mode and
enable the wireless LAN, then try to redetect the machine.
Using the Printer with the Access Point Mode
575