Canon MX490 series Online Manual page 221

2. Press the Setup button.
The Setup menu screen is displayed.
3. Use the button to select Device settings, then press the OK button.
The Device settings screen is displayed.
4. Use the button to select LAN settings, then press the OK button.
5. Use the button to select AP mode settings, then press the OK button.
The screen to enter the access point name (SSID) is displayed.
6. Enter the access point name (up to 32 characters).
Enter the access point name when you use the machine as an access point.
7. Press the OK button to finish entering the name.
8. Use the button to select the security setting, then press the OK button.
WPA2-PSK (AES)
Specifies the security setting applying WPA2-PSK (AES). Proceed to the next step when the
screen to specify the password is displayed.
Disable
Finishes the access point settings without specifying the security setting.
9. Enter the password (8 to 10 characters).
10. Press the OK button to finish specifying the password setting.
Note
• If you change the access point mode setting of the machine, also change the access point setting of
the external device such as a computer or a smartphone.
221