149: Option Not Installed; 150: Print While Unlocked; 151: Failed To Lock; 152: Insert New Card Side 2 Up - DataCard CD Series User Manual

149: Option not installed

The printer does not support the personalization being requested for the card.
The card will be canceled.
Change the card data to match the printer's options and settings, or print to a
printer that is configured to support the personalization being requested.
Press the U
message.
H & T
INTS
Don't include references in the card format to hardware that cannot be accessed
by the system. For more information, refer to your ID software documentation or
ask your system administrator.

150: Print while unlocked

The printer is unlocked. The card will be canceled.
Make sure that all access doors are closed securely and locked.
Click OK in the message box to clear the message.

151: Failed to lock

An attempt to lock the printer failed. The card will be canceled.
1.
Make sure that all access doors are closed securely.
2.
Try locking the printer again.
Click OK in the message box to clear the message.

152: Insert new card side 2 up

1.
Turn a new card over end to end so side 2 is facing up.
2.
Insert the card in the printer.
3.
If the card is not immediately picked, press the printer's U
click OK.
Click Cancel in the message box if you want to cancel the card.
SD/CD Series Card Printers User's Guide
button on the printer, or click OK in the message box to clear the
SER
IPS
button or
SER
63