Load The Cleaning Sleeve; Install The Ribbon Cartridge - DataCard CD Series Installation And Manual

Load the Cleaning Sleeve

Load a new cleaning sleeve with each new roll
of print ribbon.
The printer ships with the cleaning roller
spindle installed on the print ribbon cartridge.
1.
Remove the cleaning roller spindle from
the ribbon cartridge and slide the spindle
into the continuous cleaning sleeve (a).
2.
Place the spindle with cleaning sleeve onto
the ribbon cartridge (b).
3.
Remove the protective wrapper from the
cleaning sleeve (c).

Install the Ribbon Cartridge

Install the assembled print ribbon cartridge into the printer.
1.
Open the printer cover.
2.
Hold the print ribbon cartridge by the handle and lower it into the printer
with the handle toward the front of the printer.
3.
Make sure that the ribbon cartridge is correctly positioned in the guides.
4.
Close the printer cover (and the supplies access door on the optional multi‐
card hopper). Lock the printer, if necessary.
SD/CD Installation and Administrator's Guide 9