Table of Contents
Advertisement
102 |
Digital 9000
Using the L 60
Connecting the mains unit and switching on the L 60
Connect the DC connector of the NT 3-1 mains unit to the DC input
2
socket
of the L 60 charger.
Connect the mains plug (EU, UK or US version) of the mains unit to the
mains.
The charger switches on and goes to standby mode.
EU
UK
US
NT 3-1
Switching off the L 60 and disconnecting it from the mains
If no accupacks are inserted into the L 60, the charger is in standby mode.
To switch off the charger and the NT 3-1 mains unit and to disconnect
them from the mains:
Unplug the mains plug of the mains unit.
Charging the BA 60/BA 61 accupack
Charge the BA 60/BA 61 accupack fully before using it for the first time
or if you have not used it for an extended period of time.
The L 60 charger allows you to simultaneously charge ...
... 2 BA 60 or
... 2 BA 61 or
... 1 BA 60 and 1 BA 61.
Insert the accupack into one of the charging compartments
make sure that it locks into place with an audible click.
BA 60
3
1
2
BA 61
3
1
3
and
Advertisement
Table of Contents
