Sennheiser Digital 9000 Instruction Manual page 62

Using the EM 9046
Performing a frequency scan
Assigning frequency presets to
the channels
Numeric
measured
values
Selected
frequency
preset
60 | Digital 9000
"Range detail scan" – performing an optional frequency scan of
the active frequency range and assigning frequency presets to the
channels
Call up the "Range detail
The activated booster frequency scan and the result of the last fre-
quency scan ("Frequency
"Select channel or press SET to
please select booster range
Select channel or press SET to scan.
774.000 778.000 782.000
You can now perform a new frequency scan of the activated booster fre-
quency range (optional) or immediately assign frequency presets to the
channels.
To perform a new frequency scan of the activated booster frequency range
(optional):
Start the frequency scan by pressing the jog dial G.
Please note: All audio outputs will be muted!
To assign frequency presets to the channels:
Select one of the channels 1–8 by pressing its channel button M.
A mark with a flag and a channel number appears.
please select booster range
Preset B8.19 Freq
Range: 774 - 798 MHz
Name: „CH1" RF A: -104.5 dBm
774.000 778.000 782.000
"HD" "HD/LR"
scan" menu item.
scan" or Range detail scan") are displayed.
scan" appears in the menu selection.
n. . .
detail scan detail scan
786.000 790.000
785 . 000 MHz
freq scan
RF B: -106.5 dBm
ch_1
786.000 790.000
"LR/HD"
794.000 798.000 MHz
794.000 798.000 MHz
"LR"