Connecting Devices To The Digital Audio Outputs - Sennheiser Digital 9000 Instruction Manual

Preparing the Digital 9000 system for use
34 | Digital 9000

Connecting devices to the digital audio outputs

When equipped with an DAO digital audio out module, the EM 9046
receiver has 8 digital balanced audio outputs. The signals are output in
AES3 format.
Connect the digital audio inputs of an external device to the XLR-3
A
sockets or the sub-D socket
EM9046
A B C D E
A
XLR XLR XLR XLR
If you are using the XLR-3 sockets A:
Use a special double-shielded 110 Ω AES3 cable. This prevents that the
digital data transmission interferes with RF reception.
For the pin assignment of the XLR-3 and sub-D sockets of the
EM 9046, refer to the chapter "Specifications" on page 123.
Ready-made AES3 cables are available from Sennheiser (optional
accessories).
B
of the EM 9046.
F
B
DIGITAL MULTICORE