Table of Contents
Advertisement
Preparing the Digital 9000 system for use
44 |
Digital 9000
To
attach
the accupack/battery pack:
Slide the accupack/battery pack onto the guide rails of the bodypack
transmitter until it locks into place with an audible click.
The bodypack transmitter is then ready for operation.
1
Connecting microphones and audio sources
The audio input is designed for the connection of both pre-polarized con-
denser microphones and other audio sources. DC powering of the con-
denser microphones is via the 3-pin special audio socket
Use one of the recommended Sennheiser microphones or the
Sennheiser CI 1-4 line/instrument cable.
For an overview of suitable microphones, refer to the product over-
view on page 25.
Connect the 3-pin special audio connector of the Sennheiser microphone
or the Sennheiser CI 1-4 line/instrument cable to the 3-pin special audio
socket 1.
Lock the connector by screwing down the coupling ring.
1
2
1.
2
Advertisement
Table of Contents
