Connecting The Antenna; Connecting The Ka 9000 Com Command Adapter - Sennheiser Digital 9000 Instruction Manual
Hide thumbs
Also See for Digital 9000:
Table of Contents
Advertisement
Preparing the Digital 9000 system for use
Connecting the antenna
Only use the supplied antenna.
Connect the antenna as shown:
1
Connecting the KA 9000 COM command adapter
Using the KA 9000 COM command adapter, you can change the audio
channel on the EM 9046 receiver via remote control, e.g. for stage direc-
tions.
Connect the 3-pin special audio connector
3-pin special audio socket
Connect the 3-pin special audio connector of the Sennheiser microphone
or the Sennheiser CI 1-4 line/instrument cable to the 3-pin special audio
3
socket
of the KA 9000 COM.
2
1
of the KA 9000 COM to the
1
of the SK 9000.
Digital 9000
| 45
Advertisement
Table of Contents
