Remote Commands - Panasonic X-TG9385BX Operating Instructions Manual

TG9385BX(e).book Page 39 Monday, November 2, 2009 1:26 PM

Remote commands

You can press dial keys to access certain
answering system functions without waiting for the
voice guidance to prompt you.
1
Select the desired line(s) while you are
accessing the answering system if necessary.
For line 1: {#}{1}
For line 2: {#}{2}
For line 1 and line 2: {#}{0}
2
Press the desired dial keys.
Key Operation
Repeat message (during
{1}
playback)
Skip message (during
{2}
playback)
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record a greeting message
{#}{1}{7}
for line 1 only
Record a greeting message
{#}{2}{7}
for line 2 only
Record a common greeting
{#}{0}{7}
message for both line 1 and
line 2
Turn answering system on
{#}{1}{8}
for line 1 only
Turn answering system on
{#}{2}{8}
for line 2 only
Turn answering system on
{#}{0}{8}
for both line 1 and line 2
Stop recording
{9}
Stop playback
Turn answering system off
{0}
Erase currently playing
{*}{4}
message
Erase all messages
{*}{5}
Erase greeting message
{*}{6}
(during greeting message
playback)
End remote operation (or
{*}{#}
hang up)
*1 If pressed within the first 5 seconds of a
message, the previous message is played.
*2 To resume operation, enter a remote command
within 3 seconds, or the voice guidance starts.
*3 Unit resets to a pre-recorded greeting message.
Turning on the answering system
remotely
If the answering system is turned off, you can turn
it on remotely.
Important:
L The answering system can be remotely turned
on only for the line which you have currently
selected in "Turning the answering system
on/off", page 35.
1
*1
2
3
Note:
L If you want to turn on the answering system for
the line which has not been selected in "Turning
the answering system on/off", page 35, enter the
desired remote commands, {#}{1}{8},
{#}{2}{8}, or {#}{0}{8} (refer to the column to
the left) to turn on and access the other line.
*2
*3
Answering System
Dial your phone number from a touch-tone
phone.
Let the phone ring 15 times.
Enter your remote access code after the beep.
L The greeting message is played back.
L You can either hang up, or enter your
remote access code again and begin
remote operation (page 38).
39