Turning On The Answering; Answering System Settings; Remote Commands - Panasonic KX-TG9331T Operating Instructions Manual

Answering System
When the Spanish voice guidance is
selected
To start the voice guidance, press {9}.
The voice guidance announces the
available remote commands (page 38).
See the Spanish quick guide for details.
Note:
L If you do not press any dial keys within
15 seconds after a voice guidance
prompt, the unit disconnects your call.

Remote commands

You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Key Operation
Repeat message
{1}
(during playback)
Skip message (during
{2}
playback)
Play new messages
{4}
Play all messages
{5}
Stop playback
{9}
Start voice guidance
Turn answering
{0}
system off
Erase currently
{*}{4}
playing message
Erase all messages
{*}{5}
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.
*2 For English voice guidance only:
To resume operation, enter a remote
command within 15 seconds, or the
voice guidance starts.
*3 For Spanish voice guidance only
38
For assistance, please visit http://www.panasonic.com/help

Turning on the answering

system remotely
If the answering system is off, you can
turn it on remotely.
1
2
Skipping the greeting
message to leave a message
You can leave a message just as any
outside caller can. Call your phone
number from a touch-tone phone. When
*1
the answering system picks up, press
{*} to skip the greeting message and
record your message after the beep.
Answering system
*2
*3
settings
Number of rings before the
unit answers calls
You can change the number of times the
phone rings "Ring count" before the
unit answers calls. You can select 2 to 7
rings, or "Toll saver".
The default setting is "4".
"Toll saver": The unit's answering
system answers at the end of the 2nd
ring when new messages have been
recorded, or at the end of the 4th ring
when there are no new messages. If you
call your phone from outside to listen to
new messages (page 37), you will know
that there are no new messages when
Dial your phone number.
Let the phone ring 15 times.
L The greeting message is played
back.
L You can either hang up, or from a
touch-tone phone you can enter
your remote access code and
begin remote operation (page 37).