Panasonic X-TG9385BX Operating Instructions Manual page 29

TG9385BX(e).book Page 29 Monday, November 2, 2009 1:26 PM
*2 If you subscribe to a Caller ID service and want to view the caller's information after lifting up the
handset to answer a call, turn off this feature.
*3 This tone lets you know when you receive an outside call while you are on the other line or an intercom
call. If you select "On", the tone sounds 2 times.
*4 Turn this feature off if you prefer not to hear key tones while you are dialing or pressing any keys,
including confirmation tones and error tones.
*5 To prevent other users from joining your conversations with outside callers, turn this feature on.
*6 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even
if the caller has already hung up. You may either hear a dial tone or no one on the line when you
answer the call.
*7 The preset tones and melodies in this product are used with permission of © 2007 Copyrights Vision
Inc.
*8 When the ringer volume is turned off, ~ is displayed followed by the selected line number(s) and the
handset and/or base unit do not ring for outside calls.
*9 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary.
*10Generally, the line mode setting should not be adjusted. If the LINE1 indicator or LINE2 indicator does
not light when another phone connected to the same line is in use, you need to change the line mode
to "A".
*11If the Caller ID time and date display service is available in your area, this feature allows the unit to
automatically adjust the date and time setting when caller information is received. To use this feature,
set the date and time first.
Programming
29