Panasonic X-TG9385BX Operating Instructions Manual page 33

TG9385BX(e).book Page 33 Monday, November 2, 2009 1:26 PM
Note:
L In step 2;
– c and d indicate which line the caller
information was received from.
– If the item has already been viewed or
answered, "Q" is displayed, even if it was
viewed or answered using another unit.
– if an arrow (>) is displayed after the number,
the whole phone number is not shown.
Proceed with the operation for your unit.
Handset:
Press {>} to see the remaining numbers. To
return to the previous display, press {<}.
Base unit:
Press {8} to see the remaining numbers. To
return to the previous display, press {7}.
L In step 3, the unit automatically uses the line you
set in line selection mode (page 14) to call back.
When the line selection mode is set to "Auto",
the indicated line (c or d) is used for the call.
If the indicated line is already being used or you
want to select the other line:
Handset: Press {LINE 1} or {LINE 2}.
Base unit: Press {LINE 1} or {LINE 2}.
L If you do not want to dial the area code when
making calls from the caller list, you can store
the area code which you want the unit to delete
automatically (page 33).
Storing an area code to be deleted
automatically
In some situations, phone numbers stored
automatically in the caller list (page 32) will include
area codes. If you do not want to dial the area code
when making calls from the caller list, you can
store the area code which you want the unit to
delete automatically.
Example: You have stored the area code "123". If
you make a call from the caller list to the phone
number "123-456-7890", the unit dials "456-7890".
Program this setting using either one of the
handsets or the base unit.
Y Handset / [ Base unit
1
{MENU} i {#}{2}{5}{5}
2
Enter your area code (5 digits max.).
L To correct a digit:
Handset: Press {<} or {>} to move the
cursor, then press {CLEAR}. Enter the correct
number.
Base unit: Press {7} or {8} to move the
cursor, then press {CLEAR}. Enter the correct
number.
3
Proceed with the operation for your unit.
Handset: {SAVE} i {OFF}
Base unit: {SAVE} i {■} (EXIT)
To erase your area code
1
{MENU} i {#}{2}{5}{5}
2
Press and hold {CLEAR} until all digits
erased.
3
Proceed with the operation for your unit.
Handset: {SAVE} i {OFF}
Base unit: {SAVE} i {■} (EXIT)
Editing a caller's phone number
before calling back
Y Handset / [ Base unit
1
Proceed with the operation for your unit.
Handset: {MENU} i {V}/{^}: "View
Caller ID" i {SELECT}
Base unit: {CID}
2
{V}/{^}: Select the desired entry.
3
{MENU} i {V}/{^}: "Edit & Call" i
{SELECT}
4
Add or erase digits to the beginning of the
number as necessary.
L To add a digit, press the desired dial key.
L To erase a digit, press {CLEAR}.
5
Proceed with the operation for your unit.
Handset: {C}
Base unit: {SP-PHONE}
L If the indicated line is already being used or
you want to select the other line:
Handset: Press {CALL}, then press {LINE
1} or {LINE 2}.
Base unit: Press {LINE 1} or {LINE 2}.
Note:
L The edited phone number is not saved in the
caller list.
Caller ID Service
33