Table of Contents
Advertisement
Figure 54. Removing and installing the control panel board
1.
screw (2)
3.
display module cable
5.
control panel board
Next steps
Install the control panel board.
Related Tasks
Installing the control panel board
Installing the control panel board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
2.
Keep the Phillips #2 screwdriver ready.
Steps
1.
Align the screw holes on the control panel board with the holes on the chassis.
2.
Tighten the screws that secure the control panel board to the chassis.
142
Safety
instructions.
2.
control panel connector cable
4.
USB connector cable
6.
standoff (2)
Advertisement
Table of Contents
Troubleshooting
