Installing The Control-Panel Board - Dell PowerEdge T430 Owner's Manual

Figure 61. Removing and installing the control-panel board for systems with cabled hard drives
1. control-panel board
Related Links

Installing the control-panel board

Installing the control-panel board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Keep the #2 Phillips screwdriver ready.
Steps
1. Align the control-panel board with the control panel.
CAUTION: Take care not to damage the mylar covering the ID switch.
2. Slide the control-panel board toward the front of the control panel to lock the slide tabs and screw
holes into the respective slots on the control panel.
3. Install the three screws to secure the control-panel board to the control panel.
Safety instructions.
2. screw (3)
135