Expansion Cards And Expansion Card Risers; Expansion Card Installation Guidelines - Dell PowerEdge R930 Owner's Manual

Hide thumbs Also See for PowerEdge R930:
Table of Contents

Advertisement

Figure 27. Replacing the internal USB key
1.
USB memory key
Next steps
1.
Follow the procedure listed in
2.
While booting, press F2 to enter System Setup and verify that the USB key is detected by the system.

Expansion cards and expansion card risers

Your system supports third Generation 10 PCIe expansion card slots that include one dedicated slot for
PERC 9 storage card and one dedicated riser-slot for Network Daughter Card (NDC).

Expansion card installation guidelines

Slot 1 connector functions as an x8 connector and can be extended as two x4 slots when the left I/O riser
is installed.
Slot 9 connector functions as an x16 connector and can be extended as two x8 slots when the right I/O
riser is installed.
NOTE: A missing or an unsupported expansion card riser logs an SEL event. It does not prevent your
system from powering on and no BIOS POST message or F1/F2 pause is displayed.
NOTE: Left and right optional risers support Generation 3 expansion cards.
After working inside your
2.
USB memory key connector
system.
85

Advertisement

Table of Contents
loading

Table of Contents