Removing a hard drive from a hard drive carrier
Prerequisites
1.
Keep the #2 Phillips screwdriver ready.
2.
Remove the hard drive carrier from the system.
Steps
1.
Remove the screws from the slide rails on the hard drive carrier.
2.
Lift the hard drive out of the hard drive carrier.
Figure 23. Removing and installing a hard drive into a hard drive carrier
1.
screw (4)
3.
hard drive carrier
Related Tasks
Removing a hot-swappable hard drive carrier
Installing a hard drive into a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Keep the #2 Phillips screwdriver ready.
2.
hard drive
77