Installing The Control Panel Board - Dell poweredge t330 Owner's Manual

Figure 53. Removing and installing the control panel board for systems with hot swappable hard drives
1. control panel board
Next steps
1. Install the control panel board.
2. Follow the procedure listed in
Related Tasks

Installing the control panel board

Installing the control panel board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. Follow the procedure listed in
3. Keep the Phillips #2 screwdriver ready.
Steps
1. Align the control panel board with the control panel.
126
After working inside your
Safety instructions.
Before working inside your
2. screw (3)
system.
system.