Table of Contents
Advertisement
Figure 43. Removing and installing an AC power supply unit
1.
release latch
3.
PSU
5.
PSU handle
Next steps
Install an AC power supply unit.
Related Tasks
Installing an AC power supply unit
Installing an AC power supply unit
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you follow the
2.
Verify that both the power supply units (PSUs) are the same type and have the same maximum
output power.
NOTE: The maximum output power (shown in Watts) is listed on the power supply label.
3.
If installed, remove the PSU blank.
Steps
1.
Slide the new PSU into the chassis until the PSU is fully seated and the release latch snaps into place.
Safety
instructions.
2.
PSU power cable connector
4.
PSU connector
121
Advertisement
Table of Contents
Troubleshooting
