Kyocera ECOSYS P4040dn Operation Manual page 27

IPv4 Setting:
01 DHCP
Auto-IP
02
IP Address
03
Entering the IP address
If DHCP is set to Off, enter the IP Address manually.
IP Address:
0.
IPv4 Setting:
DHCP
01
Auto-IP
02
03 IP Address
Entering the Subnet Mask
When DHCP is set to Off, enter the Subnet Mask manually.
Subnet Mask:
0.
IPv4 Setting:
Subnet Mask
04
05 Default Gateway
Bonjour
06
14
Exit
15
16
0. 0. 0
17
18
Exit
19
20
0. 0. 0
21
22
Exit
Press [OK]. The DHCP setting is set and the IPv4 Setting menu
reappears.
Note DHCP becomes effective when On is selected. Press
[Menu] to end the mode selection menu.
When Off is set, continue on to enter the IP Address.
Press or to select IP Address.
Press [OK]. The IP Address screen appears.
Use the numeric keys or
You can set any value between 000 and 255.
Increase or reduce the figures by pressing
Use and to move the position being entered, which is shown
highlighted.
Press [OK]. The IP address is stored and the IPv4 Setting menu
reappears.
Press or to select Subnet Mask.
Press [OK]. The Subnet Mask screen appears.
Use the numeric keys or
You can set any value between 000 and 255.
The method for entering is the same as for the IP Address.
Press [OK]. The subnet mask setting is stored and the IPv4
Setting menu reappears.
2-5
Preparation before Use
or to set the IP address.
or .
or to set the subnet mask.