Kyocera ECOSYS P4040dn Operation Manual page 135

Custom Setup:
01 Netwk Name(SSID)
Connection Mode
02
Channel
03
Connect
Netwk Name (SSID) (Registration of the access point's SSID)
This sets the SSID (Service Set Identifier) for the wireless network access point the machine will be connected to.
Netwk Name(SSID):
Connection Mode (Switch between connection modes)
This selects the method for connecting to the wireless network. Set Ad Hoc when machines will be connected directly with
each other, without going through an access point.
Connection Mode:
Ad Hoc
01
* Infrastructure
02
Channel (Channel settings)
This sets the Channel to be used in the wireless network.
Channel:
(1 - 11)
2
Exit
1
2
ABC
Text
3
4
1
2
3
4
1
2
11
Press [OK]. The Custom Setup menu screen appears.
The following operations are possible:
• Netwk Name (SSID) (Registration of the access point's SSID)
• Connection Mode (Switch between connection modes)
• Channel (Channel settings)
• Netwk Authentic. (Network Authentication setting)
• Encryption (Encryption settings)
In the Custom Setup menu, press
Name(SSID).
Press [OK]. The Netwk Name(SSID) entry screen appears.
Enter the access point's SSID using the numeric keys.
Note Up to 32 characters can be entered. For details on
entering characters, refer to Character Entry Method on page
A-2.
Press [OK]. The Custom Setup menu reappears.
In the Custom Setup menu, press
Mode.
Press [OK]. The Connection Mode screen appears.
The available Connection Mode are as follows:
Ad Hoc (Connect without going through access points)
Infrastructure (Connect via an access point)
Press or to select the connection mode.
Press [OK]. The Custom Setup menu reappears.
In the Custom Setup menu, press
Press [OK]. The Channel screen appears.
4-69
Operation Panel
or to select Netwk
or to select Connection
or to select Channel.