Kyocera ECOSYS P4040dn Operation Manual page 147

Buzzer:
01 Key Confirmation
Job Finish
02
Ready
03
Key Confirmation (Key confirmation tone setting)
When On is selected in this setting, a tone sounds each time a key is used. The default setting is On.
Key Confirmation:
01 Off
* On
02
Job Finish (Job completed tone setting)
When On is selected in this setting, a tone sounds when printing ends. The default setting is Off.
Job Finish:
01 * Off
02 On
Ready (Preparation completed tone setting)
When On is selected in this setting, a tone sounds when print preparation has been completed. The default setting is Off.
Ready:
* Off
01
02 On
2
Press [OK]. The Buzzer screen appears.
Exit
1
In the Buzzer menu screen, press
Confirmation.
2
Press [OK]. The Key Confirmation screen appears.
3
Press
4
Press [OK]. The key confirmation tone setting is set and the Buzzer
menu reappears.
1
In the Buzzer menu screen, press
2
Press [OK]. The Job Finish screen appears.
3
Press
enabled.
4
Press [OK]. The printing completed tone setting is set and the
Buzzer menu reappears.
1
In the Buzzer menu screen, press
2
Press [OK]. The Ready screen appears.
3
Press
enabled.
4
Press [OK]. The preparation completed tone setting is set and the
Buzzer menu reappears.
or to select whether the key confirmation tone is enabled.
or to select whether the printing completed tone is
or to select whether the preparation completed tone is
4-81
Operation Panel
or to select Key
or to select Job Finish.
or to select Ready.