Kyocera ECOSYS P4040dn Operation Manual page 166

Enhanced WSD (Enhanced WSD setting)
Set whether to use our proprietary web services. Network driver use this Enhanced WSD Web service. The default setting
is On.
Enhanced WSD:
01 Off
02 * On
EnhancedWSD(SSL) (Enhanced WSD (SSL) setting)
Set whether to use our proprietary web services over SSL. SSL must be set to On in SSL (SSL Server setting) on page 4-
101. The default setting is On.
EnhancedWSD(SSL):
01 Off
02 * On
IPP (IPP setting)
IPP (Internet Printing Protocol) is a standard that uses TCP/IP networks such as the Internet to enable print jobs to be sent
between remote computers and printers.
IPP is an extension of the HTTP protocol used to view websites and enables printing to be carried out via routers on printers
in remote locations. It also supports the HTTP authentication mechanisms along with SSL server and client authentication
as well as encryption. The default setting is On.
IPP:
01 Off
* On
02
1
In the Network Security menu, press
WSD.
2
Press [OK]. The Enhanced WSD screen appears.
3
Press or to select whether Enhanced WSD is enabled.
4
Press [OK]. The Enhanced WSD setting is set and the Network
Security menu reappears.
1
In the Network Security menu, press
EnhancedWSD(SSL).
2
Press [OK]. The EnhancedWSD(SSL) screen appears.
3
Press or to select whether Enhanced WSD (SSL) is enabled.
4
Press [OK]. The Enhanced WSD (SSL) setting is set and the
Network Security menu reappears.
1
In the Network Security menu, press
2
Press [OK]. The IPP screen appears.
3
Press or to select whether IPP is enabled.
4
Press [OK]. The IPP setting is set and the Network Security
menu reappears.
4-100
Operation Panel
or to select Enhanced
or to select
or to select IPP.