Kyocera ECOSYS P4040dn Operation Manual page 155

Sleep Level Set. (Sleep level setting)
For Europe
This sets whether or not the machine enters sleep mode for each function.
Note Sleep Level Set. menu is not displayed when the optional Network Interface Kit (IB-50) or Wireless
Network Interface Kit (IB-51) has been installed.
Sleep Level Set.:
01 Status
Status:
Network
01
USB Cable
02
03 Card Reader
Network:
Off
01
* On
02
1
In the Timer Setting menu, press
Set..
2
Press [OK]. The Sleep Level Set. menu screen appears.
Exit
3
Press
4
Press [OK]. The Status menu screen appears.
Next set whether or not to use Energy Saver mode for each function.
Item
Network (Network interface setting)
Exit
USB Cable (USB interface setting)
Card Reader (ID card reader setting)
RAM Disk (RAM Disk Mode setting)
Parallel Cable (Parallel interface setting)
5
Press
6
Press [OK]. The screen for the function selected is displayed.
7
Press
to set the sleep mode.
8
Press [OK]. Set the sleep mode for each function and Status menu
reappears.
or to select Status.
Note Card Reader is only displayed when the ID card
reader function has been activated.
Parallel Cable is only displayed when the optional
Parallel Interface Kit (IB-32) has been installed.
or to select which function to set.
or to select whether or not to use sleep mode. Select On
Note Repeat steps 5 to 8 to set sleep mode for a different
function.
4-89
Operation Panel
or to select Sleep Level
Default Value
On
On
Off
Off
Off