Kyocera ECOSYS P4040dn Operation Manual page 110

Binding Modes
Binding refers to the manner in which printed pages of paper are joined together (by gluing, stitching, etc.) in book form.
The two possible types of binding are: Bind Long Edge, in which pages are joined together along their long edge; and Bind
Short Edge, in which they are joined together along their short edge. In selecting a binding type, you must also consider the
orientation of the printed page. You can use Bind Long Edge or Bind Short Edge with either landscape or portrait printing.
Depending on the binding type and print orientation, the duplexer provides four types of binding. These are: (1) portrait, Bind
Long Edge, (2) portrait, Bind Short Edge, (3) landscape, Bind Long Edge, and (4) landscape, Bind Short Edge. The figure
below shows these binding methods.
Duplex:
01 * Off
Bind Long Edge
02
Bind Short Edge
03
Paper Output (Selecting the output stack)
The Paper Output menu on the operation panel allows you to select either the face-down tray or the faceup tray option for
the output stack.
Paper Output:
01 * TopTray FaceDown
RearTray FaceUp
02
(1)
Portrait,
Bind Long Edge
(3)
Landscape,
Bind Long Edge
1
2
3
4
1
2
3
4
(2)
Portrait,
Bind Short Edge
(4)
In the Print Settings menu, press
Press [OK]. The Duplex screen appears showing the list of available
duplex printing modes.
Press or to select the desired duplex printing mode.
The message display toggles through the following:
Off (default)
Bind Long Edge
Bind Short Edge
Selecting Off disables duplex printing.
Press [OK]. The duplex printing mode is set and the Print
Settings menu reappears.
In the Print Settings menu, press
Output.
Press [OK]. The Paper Output screen appears.
Press or to select output stack - TopTray FaceDown or Rear
Tray FaceUp.
Press [OK]. The output stack is set and the Print Settings menu
reappears.
4-44
Operation Panel
Landscape,
Bind Short Edge
or to select Duplex.
or to select Paper