Kyocera ECOSYS P4040dn Operation Manual page 127

Bonjour:
01 Off
* On
02
IPv6 Setting (TCP/IP IPv6 settings)
This selects the settings for TCP/IP (IPv6).
TCP/IP (IPv6) is based on the current Internet protocol, TCP/IP (IPv4). IPv6 is the next-generation Internet protocol and
expands the available address space, which resolves the problem of the lack of addresses under IPv4, while also
introducing other improvements such as additional security functionality and the capacity to prioritize data transmission.
IPv6 Setting:
01 TCP/IP(IPv6)
2
Press [OK]. The Bonjour screen appears.
3
Press
4
Press [OK]. The automatic detection setting is set and the IPv4
Setting menu reappears.
1
In the TCP/IP Settings menu, press
Setting.
2
Press [OK]. The IPv6 Setting menu screen appears.
Exit
The options available in the TCP/IP (IPv6) settings are as follows:
• TCP/IP (IPv6) (Enable/disable TCP/IP (IPv6))...4-62
• RA (Stateless) (RA (Stateless) setting)...4-62
• DHCPv6 (DHCPv6 setting)...4-62
IMPORTANT The RA (Stateless) and DHCPv6 menu options for TCP/
IP (IPv6) are displayed when TCP/IP (IPv6) is enabled.
or to select whether automatic detection is enabled.
4-61
Operation Panel
or to select IPv6