Kyocera ECOSYS P4040dn Operation Manual page 165

Security:
01 Network Security
I/F Block Set.
02
Security Level
03
Network Security (Network security setting)
Use this procedure to specify the security settings for each of the network protocols used.
IMPORTANT Check with your network administrator when selecting network settings.
The options available in Network Security are as follows:
• WSD-PRINT (WSD-PRINT setting)...4-99
• Enhanced WSD (Enhanced WSD setting)...4-100
• EnhancedWSD(SSL) (Enhanced WSD (SSL) setting)...4-100
• IPP (IPP setting)...4-100
• SSL Setting (SSL Server setting)...4-101
• IPSec (IPSec setting)...4-103
• ThinPrint (Thin Print setting)...4-103
• LAN Interface (LAN Interface setting)...4-104
Network Security:
WSD-PRINT
01
02 Enhanced WSD
EnhancedWSD(SSL)
03
WSD-PRINT (WSD-PRINT setting)
Select whether or not to use WSD Print. The default setting is On.
WSD-PRINT:
Off
01
02 * On
9
Pressing [Login] ([Right Select]). If the entered Login User Name
and Login Password are correct, the Security menu screen
appears.
Exit
1
In the Security menu, press
Security.
2
Press [OK]. The Network Security menu screen appears.
Exit
1
In the Network Security menu, press
PRINT.
2
Press [OK]. The WSD-PRINT screen appears.
3
Press
4
Press [OK]. The WSD-PRINT setting is set and the Network
Security menu reappears.
or to select whether WSD-PRINT is enabled.
4-99
Operation Panel
or to select Network
or to select WSD-