Switch Between Handset And Handsfree; Switch Between Handset And Telephony Headset; Switch Between Telephony Headset And Handsfree; Use A Pc Headset - Mitel NAVIGATOR User And Administrator Manual

NAVIGATOR - SIP User and Administrator Guide

Switch between Handset and Handsfree

To go from handset to handsfree mode:
1. Press (SPEAKER).
2. Hang up the handset. Use the handsfree speaker to communicate with your party.
To go from handsfree to handset mode:
•
Lift the handset, and use it to communicate with your party.

Switch between Handset and Telephony Headset

To go from handset to headset mode:
1. Press the Headset key. The Headset key light turns ON.
2. Hang up the handset. Use the headset to communicate with your party.
To go from headset to handset mode:
1. Lift the handset.
2. Press the Headset key. The Headset key turns OFF. Use the handset to communicate with
your party.

Switch between Telephony Headset and Handsfree

To go from headset to handsfree mode:
•
Press the Headset key. The Headset key turns OFF. Use the handsfree speaker to
communicate with your party.
To go from handsfree to headset mode:
•
Press the Headset key. The Headset key turns ON. Use your headset to communicate with
your party.

Use a PC Headset

Connect your PC headset (with microphone) to the jacks on the right side of the Navigator phone.
Note: Connecting a PC headset disables your Handsfree speaker.
To make a PC headset call:
1. If you want to use a Non-Prime Line, press a Line Appearance key.
2. Make the call (see Making Calls on page 3). Your PC headset microphone and earphones
transmit and receive audio.
To answer calls using your PC headset:
•
Press the flashing line key. Your PC headset microphone and earphones transmit and
receive audio.
34